Wording for specifiers
| Specified as Mainline Power Track System |
Product Description
Mainline Power Track System
A track based power distribution system which enables flexible access to power at any point along its length via tap off units (power outlets) which can be added, removed and repositioned as and when needed by the end user.
|
Colours
Standard colours: - White or Black
Alternative colours: - Subject to minimum order quantities
|
General
The contractor shall supply and install Mainline where indicated or noted on drawings.
|
Compliance
The Contractor shall ensure that the Mainline installation complies with the requirements of the appropriate Electrical Authorities.
|
Installation
Mainline can be installed surface-mounted or recessed into third party ducting solutions.
Installation of the Mainline Power Track System shall only be carried out by a suitably qualified person in accordance with the Mainline Installation Manual.
|
| Esco Ducting |
Architects & Consultants
In this section consultants and architects can use our specifications for their projects. To specify an Esco product for your project simply highlight the text below, right click and select copy and paste into your specifications document. You can use these specifications when you are specifying any size or colour on these items. Should you require and further information, please do not hesitate to contact us.
Aluminium 2 Channel Skirting Duct 50mm deep x 160mm high - Powder Coat Finish
For installations in schools and TAFEs, the cover must be clipped in & secured.
Aluminium 2 Channel Skirting Duct 50mm deep x 160mm high
The contractor shall supply and install skirting duct Esco (Ph: 02 8799 3700) Clearway, AOL50-160 (50mm deep x 160mm high) 2-channel powder coated extruded aluminium –skirting duct, complete with Aluminium clip-in cover and accessories. The cover is to be secured & clipped in place to prevent it being easily removed. The power is to be mounted in the upper level – this duct also allows for the Mainline power track system in the upper level. The data is to be mounted in the lower level, The duct will have purpose made accessories to accommodate standard service outlets for data, and communications (HPM XL, Clipsal 2000, PDL 600 Series). The data outlets are to be mounted in the lower level. The duct should also have purpose made external corners and stop ends manufactured by the supplier.
Aluminium 2 Channel Skirting Duct 50mm deep x 160mm high - Natural Anodised Finish
For installations in schools and TAFEs, the cover must be clipped in secured.
Aluminium 2 Channel Skirting Duct 50mm deep x 160mm high
The contractor shall supply and install skirting duct Esco (Ph: 02 8799 3700) Clearway, AOL50-160 (50mm deep x 160mm high) 2-channel Natural anodised extruded aluminium –skirting duct, complete with an Aluminium clip-in cover and accessories. The cover is to be secured & clipped in place to prevent it being easily removed. The power is to be mounted in the upper level – this duct also allows for the Mainline power track system in the upper level. The data is to be mounted in the lower level, The duct will have purpose made accessories to accommodate standard service outlets for data, and communications (HPM XL, Clipsal 2000, PDL 600 Series). The data outlets are to be mounted in the lower level. The duct should also have purpose made external corners and stop ends manufactured by the supplier.
Click here to download Data Sheet.
|
| Ductall 150:50MT - Commercial Trunking |
Supplied By
Ductall Systems
444 Punchbowl Road Belfield
97598200
Contact Person: - Reece Allen
|
Product Description
Ductall 150:50 MT Commercial Trunking
A two channel extruded aluminium Commercial Trunking duct measuring 150mm x 50mm. Which incorporates the Mainline Power Track System in the top channel with data reticulated via the lower channel - (Cat 6 compliant).
|
Colours
Natural anodised is the standard base colour. A Custom Powdercoat finish can be achieved using standard colours in the ‘Dulux’ colour range.
|
General
The contractor shall supply and install the skirting duct system where indicated or noted on drawings. The ducting system shall be supplied and installed complete with all factory made accessories.
|
Covers
Standard Data Cable Cover – as illustrated below or Data Plates with pre-punched holes for data and com points.
|
Compliance
The Contractor shall ensure that the entire skirting wiring duct installation complies with the requirements of the local supply Authority and Austel. All ducting shall be earthed.
|
Installation
The 150:50MT shall be installed surface-mounted or semi-recessed
The skirting wiring duct shall be fixed to walls alternatively at the top and bottom of the duct at maximum centres of 800mm. All joints (butt, corner and angled) shall be neatly achieved in professional fashion with no visible gaps.
Supply and install wiring access via conduits within stud walls, etc. and associated draw wires, to all duct sections throughout this installation. Access shall be separate for each duct channel to maintain electrical isolation.
|
|
Cross Section of 150:50MT Commercial Trunking
 |
|
Image of the Ductall 150:50MT Commercial Trunking with Mainline Power Track System installed.
 |
| Ductall 125:21MT - Skirting System |
Supplied By
Ductall Systems
444 Punchbowl Road Belfield
97598200
Contact Person: - Reece Allen
|
Product Description
Ductall 125:21 MT Skirting System
A single piece extruded aluminium skirting duct measuring 125mm x 21mm, which incorporates the Mainline Power track system either channel depending on the type of installation. The 125:21 skirting can be surface or flush mounted, recessed or supplied as a top-hat recessable duct. Limited data or communication cabling can be reticulated using the lower channel of the Ductall 125:21 skirting system.
|
Colours
Natural anodised is the standard base colour. A Custom Powdercoat finish can be achieved using standard colours in the ‘Dulux’ colour range.
|
General
The contractor shall supply and install the skirting duct system where indicated or noted on drawings. The ducting system shall be supplied and installed complete with all factory made accessories.
|
Compliance
The Contractor shall ensure that the entire skirting wiring duct installation complies with the requirements of the local supply Authority and Austel. All ducting shall be earthed.
|
Installation
The Ductall 125:21 MT Skirting system shall be installed surface-mounted or recessed
The Ductall 125:21 MT Skirting system shall be fixed to wall alternatively at the top of the duct at maximum centres of 300. All joints (butt, corner and angled) shall be neatly made in a tradesman like fashion with no visible gaps.
Supply and install wiring access via conduits within stud walls, etc. and associated draw wires, to all duct sections throughout this installation. Access shall be separate for each duct channel to maintain electrical isolation.
|
|
Cross Section of 125:21MT skirting system
Ductall 125:21 MT Skirting System in the orientation for Flush Mounting
|
Ductall 125:21 MT Skirting System in the orientation for surface Mounting
|
|
|
|
Image of the Ductall 125:21MT skirting system with Mainline Power Track System installed in flush mount orientation.
 |
Image of the Ductall 125:21MT skirting system with Mainline Power Track System installed in the surface mount orientation.
|
|
Image of the Ductall 125:21MT skirting system with Mainline Power Track System flush mounted in the “Top Hat Channel".
| |
|
|
What our customers say ...
‘The Mainline system is as revolutionary as it is evolutionary’
ICT Manager, Sydney
‘I highly recommend the product as the 21st Century power distribution system and I am very excited about the future of this product, I believe it will rapidly become the norm for power access’
Stephen Howlett, Head, Administration & Operations, Centre for English Teaching, The University of Sydney
‘I can confirm that the Mainline system is not only simpler and quicker to install then normal power points, it is also cheaper to install in most situations’
Edward Priest, Director, Advanced Cabling Systems
‘It is a must for all office environments’
Neill Rose-Innes, Chief Information Officer, Mortgage Choice
‘When applied to the project it became apparent that the system offered much more than conventional power outlets’
Anthony Chiofalo, Project Manager, Campus Infrastructure & Services, The University of Sydney